Metal Roof Replacement Cost in Burbank: A Homeowner's Guide
A metal roof replacement in Burbank typically runs $9,900 – $49,500 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Burbank, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$9,900 – $24,500
- Standing seam steelConcealed fasteners, premium panel$18,500 – $49,500
- AluminumCorrosion-resistant — fits coastal climates$16,000 – $40,500
- Stone-coated steelShingle or tile look in metal$17,000 – $37,000
- Copper & zincSpecialty architectural metals$31,000 – $74,000+
- Tear-off & disposalRemoving the old roof$1,250 – $3,700
- Permits & inspectionVaries by municipality$300 – $1,250
* Adjusted for Burbank; an on-site measure refines panel and trim counts.
Ready to price your roof in Burbank?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 9am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Burbank.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Burbank estimate
Adjust the inputs below. The range updates live and is adjusted for Burbank's labor market —+23% vs national avg.
Indicative range based on Burbank-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Burbank.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Burbank: what matters
Burbank's mix of mid-century ranch homes and newer developments means metal roofs are a common sight. The city's Mediterranean climate—hot, dry summers and mild winters—puts roofs through cycles of intense UV exposure and occasional Santa Ana winds. Over time, this can cause metal panels to expand and contract, stressing fasteners and seams. If your home is in the Rancho Equestrian District or the hillside neighborhoods above Olive Avenue, you may also contend with wildfire ember exposure, making metal's fire resistance a key advantage. Understanding the factors that influence replacement costs helps you plan for this significant investment. This guide covers what Burbank homeowners should know about metal roof replacement, from material choices to local permitting requirements.
Why Metal Roof Replacement Costs Vary in Burbank
Several factors unique to Burbank affect metal roof replacement costs. The local building code follows California's Title 24 energy standards, which may require cool-roof coatings or specific insulation underlayments. Labor rates reflect the greater Los Angeles area's higher cost of living. Disposal fees for old roofing materials can vary depending on whether you use a certified hauler. The age and style of your home matter: older homes in the Magnolia Park neighborhood may need structural upgrades to support heavier metal panels, while newer tract homes often have simpler roof geometries that are faster to install. Permit fees are set by the city's building department and depend on project scope. Finally, the type of metal—steel, aluminum, or copper—and the panel profile (standing seam vs. corrugated) significantly impact material costs.
Burbank by the numbers
U.S. Census Bureau · ACS- 110,457
- Population
- 19,769
- Homeowners
- $938,489
- Median home value
- $93,922
- Median income
- 1959
- Median home built
- 48,025
- Housing units
19,769 homeowner households, median home built 1959 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Burbank.
Common Reasons Burbank Homes Need Metal Roof Replacement
UV Degradation
Burbank's abundant sunshine accelerates fading and chalking of paint coatings on metal roofs. Over 20-30 years, the protective layer can wear thin, leading to corrosion.
Santa Ana Wind Damage
Strong, dry Santa Ana winds can lift metal panels if fasteners have loosened over time. This is especially common in exposed hillside areas like the Verdugo Mountains foothills.
Thermal Expansion Stress
Large temperature swings between day and night cause metal panels to expand and contract. Repeated movement can fatigue fasteners and create leaks at seams.
Hail Impact
Though less frequent than in the Midwest, Burbank experiences occasional hailstorms that can dent softer metals like aluminum, compromising appearance and performance.
Corrosion from Coastal Moisture
Despite being inland, Burbank's proximity to the Pacific means salt-laden air can reach the area during marine layer events, accelerating corrosion on uncoated steel.
What to Expect During a Metal Roof Replacement in Burbank
Replacing a metal roof in Burbank begins with a thorough inspection to assess the existing structure and measure the roof. Your contractor will pull permits with the city's building department, which may require a site plan and energy compliance documentation. The old roof is removed and disposed of, then the deck is inspected for rot or damage. Underlayment is installed, followed by the metal panels. Flashing around chimneys, vents, and skylights is critical for weather-tightness. Finally, the city inspects the work to ensure it meets California building code. The entire process typically takes one to two weeks, depending on roof complexity and weather. Choose a contractor licensed by the California Contractors State License Board (CSLB) to ensure proper insurance and bonding.
Metal Roof pricing near Burbank
Metal Roof cost questions — Burbank
How long does a metal roof last in Burbank's climate?
A properly installed metal roof in Burbank can last 40-70 years, depending on the material and maintenance. Steel and aluminum are common choices, withstanding UV exposure and wind well. Regular inspections after Santa Ana wind events can extend its life.
Do I need a permit for a metal roof replacement in Burbank?
Yes, the city of Burbank requires a building permit for any roof replacement. Your contractor should handle the permit application, which includes plan checks and a final inspection. Permit fees vary by project size but are typically a few hundred dollars.
What should I look for when hiring a roofing contractor in Burbank?
Verify that the contractor is licensed by the California Contractors State License Board (CSLB) and carries liability insurance and workers' compensation. Ask for local references and check online reviews. A detailed written estimate should outline materials, labor, and permit costs.
Is metal roofing energy-efficient for Burbank homes?
Yes, metal roofs reflect solar heat, which can reduce cooling costs during Burbank's hot summers. Many metal panels come with cool-roof coatings that meet California's Title 24 energy requirements. Proper insulation underneath also improves efficiency.
What is the ideal time of year for a metal roof replacement in Burbank?
Spring and fall offer mild temperatures and lower rainfall, making them ideal for roof work. Summer can be very hot, which may slow installation, while winter is generally dry but cooler. Plan ahead, as contractors may be busier in peak seasons.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 9am–7pm