Metal Roof Replacement Cost in Inglewood, California
A metal roof replacement in Inglewood typically runs $8,800 – $44,000 installed ($10 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Inglewood, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,800 – $22,000
- Standing seam steelConcealed fasteners, premium panel$16,500 – $44,000
- AluminumCorrosion-resistant — fits coastal climates$14,500 – $36,500
- Stone-coated steelShingle or tile look in metal$15,500 – $33,000
- Copper & zincSpecialty architectural metals$27,500 – $66,000+
- Tear-off & disposalRemoving the old roof$1,100 – $3,300
- Permits & inspectionVaries by municipality$275 – $1,100
* Adjusted for Inglewood; an on-site measure refines panel and trim counts.
Ready to price your roof in Inglewood?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 9am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Inglewood.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Inglewood estimate
Adjust the inputs below. The range updates live and is adjusted for Inglewood's labor market —+10% vs national avg.
Indicative range based on Inglewood-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Inglewood.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Inglewood: what matters
Inglewood's mix of older post-war bungalows and newer developments near SoFi Stadium means a wide range of roofing needs. With the city's mild Mediterranean climate, metal roofs are a popular choice for their durability against sun exposure and occasional Santa Ana winds. If your metal roof is showing signs of age—like rust, dents, or leaks—replacement is a smart investment. This guide covers what Inglewood homeowners should know about the process, local factors that influence cost, and how to prepare for a new metal roof. Understanding these details helps you make informed decisions without focusing on specific prices.
Why Metal Roof Replacement Costs Vary in Inglewood
Several local factors affect the cost of metal roof replacement in Inglewood. The age and style of your home matter: older neighborhoods like Morningside Park often have steep-slope roofs that require more labor and safety measures. California's strict building codes, including seismic requirements and energy efficiency standards, can add to material and labor costs. The local climate—with intense UV rays and occasional high winds—means you may need thicker gauge metal or specialized coatings. Labor rates in the Los Angeles area are higher than national averages, and disposal of old roofing materials follows state environmental regulations. Permit fees from the city's permitting office also contribute to the total.
Inglewood by the numbers
U.S. Census Bureau · ACS- 130,422
- Population
- 14,660
- Homeowners
- $680,496
- Median home value
- $66,257
- Median income
- 1960
- Median home built
- 45,120
- Housing units
14,660 homeowner households, median home built 1960 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Inglewood.
Common Reasons Inglewood Homes Need Metal Roof Replacement
UV Degradation
Inglewood's abundant sunshine causes paint and coatings on metal roofs to fade and chalk over time, leading to corrosion if not addressed.
Wind Damage
Santa Ana winds can lift standing seam panels or loosen fasteners, especially on older installations with inadequate attachment.
Rust and Corrosion
In coastal areas like Inglewood, salt-laden air accelerates rust on steel roofs, particularly at cut edges and fasteners.
Improper Installation
Many older metal roofs in Inglewood were installed without proper expansion joints or underlayment, leading to leaks and panel distortion.
Hail Damage
While rare, hailstorms in the region can dent softer metals like aluminum, compromising the roof's appearance and performance.
What to Expect During a Metal Roof Replacement in Inglewood
In California, roofing contractors must hold a valid state license (Class C-39 for roofing). Your contractor will pull permits with the city's permitting office and schedule inspections. The process begins with a thorough inspection and measurement of your roof. After tear-off and disposal of old materials, the deck is inspected and repaired if needed. Underlayment and ice/water shield are installed, followed by the metal panels or shingles. Flashing around vents, chimneys, and skylights is carefully integrated. A final inspection by the city ensures compliance with local building codes. The entire project typically takes one to two weeks, depending on roof complexity and weather.
Metal Roof pricing near Inglewood
Metal Roof cost questions — Inglewood
What factors affect metal roof replacement cost in Inglewood?
Cost depends on roof size, slope, complexity, and the type of metal (steel, aluminum, copper). Local labor rates, permit fees, and disposal costs also play a role. Older homes in neighborhoods like Century Heights may require additional structural reinforcement to support the weight of a metal roof. Energy-efficient coatings or cool roof certifications can add to material costs but may offer long-term savings.
How do I choose a roofing contractor in Inglewood?
Look for a contractor with a valid California C-39 license and proof of insurance. Check references and online reviews, and ask about their experience with metal roofing specifically. Get multiple written estimates that detail materials, labor, and timeline. Verify that they will pull permits and schedule inspections. Avoid contractors who ask for full payment upfront.
What are California's licensing requirements for roofers?
Roofing contractors in California must hold a Class C-39 license from the Contractors State License Board (CSLB). This requires passing a trade exam and a business law exam, as well as proof of experience and financial stability. Workers' compensation insurance is mandatory. Always verify a contractor's license number on the CSLB website before hiring.
When is the ideal time to replace a metal roof in Inglewood?
The mild climate allows for year-round installation, but spring and fall offer the most comfortable working conditions. Avoid scheduling during the rainy season (November to March) to minimize weather delays. Summer can be very hot, which may affect adhesive curing times. Plan ahead, as good contractors are often booked weeks in advance.
Do I need a permit for a metal roof replacement in Inglewood?
Yes, most roof replacements in Inglewood require a building permit from the city's permitting office. Your contractor should handle this process. The permit ensures the work meets local building codes, including structural and energy requirements. Inspections are typically required at key stages, such as after tear-off and after installation.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 9am–7pm