Metal Roof Replacement Cost in Moline, Illinois: What Homeowners Should Know
A metal roof replacement in Moline typically runs $7,800 – $39,000 installed ($5 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Moline, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$7,800 – $19,500
- Standing seam steelConcealed fasteners, premium panel$14,500 – $39,000
- AluminumCorrosion-resistant — fits coastal climates$12,500 – $32,000
- Stone-coated steelShingle or tile look in metal$13,500 – $29,000
- Copper & zincSpecialty architectural metals$24,500 – $58,500+
- Tear-off & disposalRemoving the old roof$950 – $2,900
- Permits & inspectionVaries by municipality$250 – $950
* Adjusted for Moline; an on-site measure refines panel and trim counts.
Ready to price your roof in Moline?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Moline.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Moline estimate
Adjust the inputs below. The range updates live and is adjusted for Moline's labor market —-3% vs national avg.
Indicative range based on Moline-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Moline.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Moline: what matters
Moline homeowners are increasingly turning to metal roofing for its durability and longevity. With the Quad Cities region experiencing everything from heavy snow loads to summer hailstorms, a metal roof can offer better protection than traditional asphalt. But what does a replacement actually involve? Whether you live in an older home near the Mississippi River or a newer subdivision in the hills, the cost depends on several local factors. This guide walks through the key considerations for metal roof replacement in Moline, helping you understand the process without focusing on specific price tags.
Why Metal Roof Replacement Costs Vary in Moline
Moline's climate plays a major role in pricing. The area sees frequent freeze-thaw cycles and occasional severe thunderstorms with hail, which can affect material choices and installation complexity. Homes in older neighborhoods like the Broadway Historic District often have steep or complex roof pitches that require more labor. Illinois state building code requires permits and inspections for structural changes, adding to project overhead. Additionally, disposal of old roofing materials and local labor rates in the Quad Cities influence overall costs. The type of metal—steel, aluminum, or copper—and the gauge thickness also impact the final price.
Moline by the numbers
U.S. Census Bureau · ACS- 44,006
- Population
- 12,735
- Homeowners
- $140,600
- Median home value
- $63,755
- Median income
- 1956
- Median home built
- 20,587
- Housing units
12,735 homeowner households, median home built 1956 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Moline.
Common Reasons Moline Roofs Need Replacement
Hail Damage
Moline is part of the Midwest's hail alley, and significant hailstorms can bruise or crack metal panels, leading to leaks and reduced lifespan.
Wind Uplift
Strong winds from thunderstorms can lift or loosen metal panels, especially if the original installation used exposed fasteners. This compromises the roof's integrity.
Ice Dams
Freeze-thaw cycles in Moline winters can cause ice dams along eaves, which may force water under metal panels and damage the underlying structure.
Corrosion Near the River
Homes close to the Mississippi River are exposed to higher humidity and occasional flooding, which can accelerate corrosion on steel roofs if not properly coated.
Expansion and Contraction
Wide temperature swings in the Quad Cities cause metal to expand and contract, stressing fasteners and seams over time, eventually leading to leaks.
What to Expect During a Metal Roof Replacement in Moline
In Illinois, roofing contractors must hold a valid license from the state and carry liability insurance. Your local building department in Moline will require a permit for a full roof replacement. The process typically begins with an inspection and measurement of your roof. After ordering materials, the crew removes the old roof, inspects the decking, and installs underlayment and flashing. Metal panels are then secured, often with hidden fasteners for better wind resistance. A final inspection by the city ensures compliance with Illinois building codes. The entire project usually takes several days to a week, depending on roof size and complexity.
Metal Roof pricing near Moline
Metal Roof cost questions — Moline
How long does a metal roof last in Moline's climate?
A properly installed metal roof can last 40 to 70 years, depending on the material and maintenance. In Moline, where winters bring snow and ice and summers bring hail and UV exposure, choosing a high-quality coating and gauge extends the lifespan. Regular inspections after severe weather help catch minor issues early.
Do I need a permit for a metal roof replacement in Moline?
Yes, Moline requires a building permit for any roof replacement that involves structural changes or new materials. Your contractor should handle the permit application with the city's building department. The permit ensures the work meets Illinois state building codes and includes an inspection after installation.
What type of metal is ideal for Moline's weather?
Steel and aluminum are common choices. Steel is strong and affordable but can rust if the coating is damaged. Aluminum resists corrosion better, which is helpful near the river. Copper is durable but more expensive. A good paint finish with a Kynar or similar coating improves UV and hail resistance.
When is the ideal time to replace a roof in Moline?
Late spring through early fall is the ideal window, as temperatures are mild and rain is less frequent. Winter installations are possible but can be delayed by snow or cold, which affects sealant curing. Scheduling early in the season gives you more flexibility with contractor availability.
How do I choose a roofing contractor in Moline?
Look for a contractor with an Illinois roofing license, liability insurance, and worker's compensation. Ask for local references and check online reviews. A written estimate should detail materials, labor, and timeline. Avoid contractors who ask for full payment upfront. The right contractor will also help with permits and inspections.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm