Metal Roof Replacement Cost in Franklin Square: What to Expect
A metal roof replacement in Franklin Square typically runs $8,100 – $40,500 installed ($5 – $20 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Franklin Square, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$8,100 – $20,000
- Standing seam steelConcealed fasteners, premium panel$15,000 – $40,500
- AluminumCorrosion-resistant — fits coastal climates$13,000 – $33,500
- Stone-coated steelShingle or tile look in metal$14,000 – $30,500
- Copper & zincSpecialty architectural metals$25,500 – $60,500+
- Tear-off & disposalRemoving the old roof$1,000 – $3,000
- Permits & inspectionVaries by municipality$250 – $1,000
* Adjusted for Franklin Square; an on-site measure refines panel and trim counts.
Ready to price your roof in Franklin Square?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Franklin Square.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Franklin Square estimate
Adjust the inputs below. The range updates live and is adjusted for Franklin Square's labor market —+1% vs national avg.
Indicative range based on Franklin Square-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Franklin Square.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Franklin Square: what matters
Franklin Square's mix of older Cape Cods and postwar colonials means many roofs are reaching the end of their service life. Combined with the region's freeze-thaw cycles and occasional nor'easters, homeowners here are increasingly considering metal roofing for its durability. If you're planning a metal roof replacement in Franklin Square, understanding the local factors that influence cost can help you budget realistically. From snow loads to permit requirements, this guide covers what Franklin Square residents need to know before getting estimates.
Why Metal Roof Replacement Costs Vary in Franklin Square
Several factors unique to Franklin Square affect metal roof replacement costs. The local climate brings snow and ice in winter, which can require higher-gauge metal and ice-and-water shield underlayment. Hail events, though less frequent than in the Plains, can dent softer metals, so many homeowners opt for impact-resistant standing seam panels. The age of Franklin Square's housing stock—much of it built in the 1950s and 1960s—means older roof structures may need reinforcement to support metal's weight. New York's building code requires specific wind uplift ratings, especially in coastal zones, which can influence material choices. Labor rates reflect the Long Island market, and disposal of old asphalt shingles adds a fee. Finally, the city's permitting office requires a permit for any roof replacement, and compliance with the state energy code may affect insulation requirements.
Franklin Square by the numbers
U.S. Census Bureau · ACS- 25,751
- Population
- 6,930
- Homeowners
- $632,100
- Median home value
- $136,378
- Median income
- 1953
- Median home built
- 8,416
- Housing units
6,930 homeowner households, median home built 1953 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Franklin Square.
Common Issues
Hail Bruising
Hailstorms in the New York area can dent aluminum or steel panels, reducing curb appeal and potentially voiding warranties. Impact-resistant metal is often chosen to avoid premature replacement.
Wind-Lifted Panels
Nor'easters and strong thunderstorms can lift improperly fastened metal panels. Franklin Square's exposure to coastal winds means panels must meet higher wind-uplift ratings per local code.
Ice Dam Damage
Snow accumulation and freeze-thaw cycles cause ice dams that can force water under metal panels. Proper ice-and-water shield and ventilation are critical to avoid leaks and rot.
UV Degradation of Paint
Intense summer sun accelerates fading and chalking of painted metal roofs. High-quality PVDF coatings are recommended to maintain appearance over decades.
Expansion/Contraction Stress
Wide temperature swings in Franklin Square cause metal panels to expand and contract. Improperly designed systems can buckle or leak, requiring replacement sooner than expected.
Metal Roof pricing near Franklin Square
Metal Roof cost questions — Franklin Square
What factors affect metal roof replacement cost in Franklin Square?
Costs vary based on material choice (steel vs. aluminum vs. copper), roof complexity (pitch, penetrations), and whether old roofing needs removal. Local building codes may require specific underlayments or wind-uplift ratings, adding to material costs. Labor rates on Long Island are higher than national averages. Permits from the village add a fee. The condition of the existing roof deck—if rot is found—can increase costs. Finally, disposal of old shingles is charged by weight.
How do I choose a roofing contractor in Franklin Square?
Look for contractors licensed in New York State and insured with workers' comp and liability coverage. Ask for local references and check their standing with the Better Business Bureau. Get multiple written estimates that detail materials, labor, and timeline. Avoid contractors who require full payment upfront. Verify they pull the required permit with the village. A reputable contractor will also offer a warranty on both materials and workmanship.
What are New York's licensing requirements for roofers?
New York does not have a statewide roofing license, but contractors must register with the state as a home improvement contractor. Franklin Square may require a local business license. Roofers must carry workers' compensation and disability insurance. For metal roofing, no special certification is mandated, but experience with standing seam systems is important. Always confirm the contractor's license and insurance before signing a contract.
When is the ideal time to replace a metal roof in Franklin Square?
Late spring through early fall offers the most consistent weather for installation. Temperatures above 50°F allow sealants to cure properly and metal to be handled without contraction issues. Avoid winter months when snow and ice can delay work and compromise safety. Scheduling in spring or early summer also helps avoid the peak hurricane season in late summer.
Do I need a permit for a metal roof replacement in Franklin Square?
Yes, Franklin Square requires a building permit for any roof replacement. The contractor typically handles this, but you should confirm. Permit fees vary based on project value. Inspections may be required at the underlayment stage and upon completion. Failure to obtain a permit can lead to fines and issues when selling the home.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm