Metal Roof Replacement Cost in Cameron, North Carolina
A metal roof replacement in Cameron typically runs $7,600 – $38,000 installed ($5 – $15 per sq ft) — corrugated panels at the low end, standing seam at the top — tear-off and local labor included.
New roof installs & full replacements · No obligation
Metal roofing cost by panel type.
Installed prices for Cameron, adjusted for local labor. Roof size, pitch, and trim complexity move the number within each range.
- Corrugated / exposed fastenerEntry point for metal roofing$7,600 – $19,000
- Standing seam steelConcealed fasteners, premium panel$14,500 – $38,000
- AluminumCorrosion-resistant — fits coastal climates$12,500 – $31,500
- Stone-coated steelShingle or tile look in metal$13,500 – $28,500
- Copper & zincSpecialty architectural metals$24,000 – $57,000+
- Tear-off & disposalRemoving the old roof$950 – $2,900
- Permits & inspectionVaries by municipality$250 – $950
* Adjusted for Cameron; an on-site measure refines panel and trim counts.
Ready to price your roof in Cameron?
Speak with a licensed, independent roofing contractor. No obligation.
Lines: Mon–Fri 10am–7pm
What happens when you call
Call the number
Takes about two minutes — no account, no forms.
Describe your roof
Roof type, approximate size, and what you want done in Cameron.
Talk to a licensed contractor
You get connected with an independent local roofing pro. No obligation.
Build your Cameron estimate
Adjust the inputs below. The range updates live and is adjusted for Cameron's labor market —-5% vs national avg.
Indicative range based on Cameron-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.
Get real quotes for this range · No obligation
Before you sign: the quote checklist
- Get quotes from at least 3 licensed roofing contractors in Cameron.
- Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
- Verify licensing and insurance before hiring — ask for certificates, not promises.
- Ask about both the material warranty and the workmanship warranty — they differ.
Metal Roof in Cameron: what matters
Cameron, North Carolina, sits in the Sandhills region where hot, humid summers and occasional winter ice storms put roofs to the test. Many homes in the area were built during the 1990s and 2000s, meaning original asphalt shingle roofs are now reaching the end of their service life. For homeowners considering a longer-lasting alternative, metal roofing is a popular choice. However, the cost to replace a roof with metal in Cameron depends on several local factors, including the home's size and pitch, the complexity of the roofline, and the specific metal material selected. Understanding these variables helps you plan for a durable roof that stands up to North Carolina's weather.
Why Metal Roof Replacement Costs Vary in Cameron
Several factors unique to Cameron influence metal roof replacement costs. The region's climate—with high humidity, frequent thunderstorms, and occasional hail—favors materials like standing seam or stone-coated steel that resist impact and corrosion. Older homes in established parts of town may have steeper roof pitches or multiple valleys, increasing labor time. Newer subdivisions often have simpler roof designs, which can reduce labor costs. North Carolina's building code requires proper underlayment and fastening for wind resistance, adding to material and labor requirements. Local labor rates reflect the area's cost of living, and disposal of old roofing materials carries a fee at the county landfill. Permit fees from the city's permitting office also factor into the total.
Cameron by the numbers
U.S. Census Bureau · ACS- 25,713
- Population
- 5,157
- Homeowners
- $224,200
- Median home value
- $78,270
- Median income
- 2001
- Median home built
- 9,106
- Housing units
5,157 homeowner households, median home built 2001 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Cameron.
Common Issues
Hail Damage
Cameron experiences hail storms that can bruise or crack asphalt shingles, leading to leaks. Metal roofs resist hail better, but older metal panels may show dents that compromise appearance.
Wind-Lifted Shingles
Strong winds from thunderstorms and occasional hurricanes can lift or tear off asphalt shingles, exposing the deck. A metal roof with secure interlocking seams is less vulnerable.
UV Degradation
Intense North Carolina sun causes asphalt shingles to dry out, crack, and lose granules. Metal roofs reflect UV rays, lasting longer without deterioration.
Moss and Algae Growth
Humidity and shade promote moss and algae on roofs, trapping moisture and accelerating decay. Metal's smooth surface discourages growth and is easier to clean.
Ice Dam Formation
Winter ice storms can cause ice dams on poorly ventilated roofs, leading to water backup. Metal roofs shed snow more readily, reducing dam risk.
Metal Roof pricing near Cameron
Metal Roof cost questions — Cameron
What factors affect metal roof replacement cost in Cameron?
Cost depends on roof size, pitch, complexity, metal type (steel vs. aluminum vs. copper), underlayment, and local labor rates. Removing old roofing and disposing of it adds to the total. Permit fees from the city's permitting office are also required. No two quotes are identical, so comparing multiple estimates is recommended.
How do I choose a roofing contractor in Cameron?
Look for contractors licensed in North Carolina, with proof of insurance and local references. Check for manufacturer certifications for metal roofing installation. Ask about their experience with metal roofs specifically, and request a detailed written estimate. Avoid contractors who pressure you to sign immediately.
What are North Carolina's licensing requirements for roofers?
North Carolina requires general contractors to be licensed for projects over $30,000. For smaller jobs, a license may not be mandatory, but it's wise to hire a licensed contractor anyway. Verify the license number with the North Carolina Licensing Board. Also, ensure the contractor pulls any required permits from the local building department.
When is the ideal time to replace a metal roof in Cameron?
Spring and fall offer moderate temperatures, which help sealants cure properly. Summer heat can make work uncomfortable, while winter cold may affect adhesive performance. However, experienced crews can work year-round. Plan ahead, as weather delays can occur during storm seasons.
Do I need a permit for a metal roof replacement in Cameron?
Yes, most municipalities require a roofing permit. Your contractor should handle the permit application with the city's permitting office. Permit fees are typically based on the project's value. Failing to pull a permit can result in fines and issues when selling your home.
Get a metal roofing quote.
Standing seam or corrugated — compare quotes from licensed local roofers.
Lines: Mon–Fri 10am–7pm