New York · Local pricing guide

Shingle Roof Replacement Cost in Bellmore, New York

Typical installed range — asphalt shingles
$6,100 – $17,500

A shingle roof replacement in Bellmore typically runs $6,100 – $17,500 installed — $375 – $750 per square (100 sq ft) — from 3-tab up to architectural grade, tear-off included.

New roof installs & full replacements · No obligation

Price reference · Reviewed June 2026

Shingle roofing cost by grade.

Installed prices for a full shingle replacement in Bellmore. Roofers quote per square (100 sq ft) — a typical single-family roof runs 17–25 squares.

  • 3-tab shingles
    Flat profile, 15–20 year typical service
    $6,100 – $11,500
  • Architectural shingles
    Dimensional, 25–30 year — the U.S. default
    $8,800 – $17,500
  • Designer / premium shingles
    Slate and shake look-alikes
    $13,000 – $27,500
  • Underlayment & ice barrier
    Synthetic felt, ice & water shield where code requires
    $550 – $2,200
  • Deck repair (plywood)
    Replacing rotted sheathing, priced by extent
    $550 – $2,800
  • Tear-off & disposal
    Old layers off, dumpster included
    $1,100 – $3,300
  • Permits & inspection
    Varies by municipality
    $275 – $1,100

* Adjusted for Bellmore's labor market — an on-site measure sets the square count.

Talk to a roofer

Ready to price your roof in Bellmore?

Speak with a licensed, independent roofing contractor. No obligation.

(855) 000-0000

Lines: Mon–Fri 10am–7pm

How it works

What happens when you call

  1. Call the number

    Takes about two minutes — no account, no forms.

  2. Describe your roof

    Roof type, approximate size, and what you want done in Bellmore.

  3. Talk to a licensed contractor

    You get connected with an independent local roofing pro. No obligation.

Interactive

Build your Bellmore estimate

Adjust the inputs below. The range updates live and is adjusted for Bellmore's labor market —+10% vs national avg.

Your estimate
$9,500$18,500
for Bellmore, New York · +10% vs national avg

Indicative range based on Bellmore-adjusted rates. Deck condition, flashing, and contractor overhead may shift the final invoice. Get written quotes from licensed roofing contractors before signing.

Call (855) 000-0000

Get real quotes for this range · No obligation

Before you sign: the quote checklist

  • Get quotes from at least 3 licensed roofing contractors in Bellmore.
  • Make sure every quote itemizes tear-off, underlayment, flashing, and disposal.
  • Verify licensing and insurance before hiring — ask for certificates, not promises.
  • Ask about both the material warranty and the workmanship warranty — they differ.
The local picture

Shingle Roof in Bellmore: what matters

Bellmore's coastal Long Island location means your roof faces a unique mix of salt air, high humidity, and nor'easters. Many homes here were built in the mid-20th century, with steep-pitch roofs that shed snow but also catch the brunt of summer sun. If your shingles are curling or you've noticed granules in the gutters, it's likely time to plan for a replacement. The cost of a new shingle roof in Bellmore depends on several factors tied to local conditions and building practices. Understanding these can help you budget realistically and choose the right materials for your home.

Cost factors

Why Shingle Roof Replacement Costs Vary in Bellmore

Bellmore's coastal climate accelerates wear on roofing materials, so many homeowners opt for impact-resistant shingles that cost more but last longer. The age and style of your home also matter—older capes and ranches may have complex rooflines that require more labor. New York's building code mandates specific underlayment and ice-and-water shield requirements, especially on low-slope roofs, which can add to material costs. Local labor rates reflect the higher cost of living on Long Island, and disposal fees for old shingles are regulated. Finally, permit fees from the Town of Hempstead vary by project scope and can influence the total price.

Bellmore by the numbers

U.S. Census Bureau · ACS
34,950
Population
10,221
Homeowners
91% own
$619,500
Median home value
$167,039
Median income
1957
Median home built
≈ 69 yrs old
11,553
Housing units

10,221 homeowner households, median home built 1957 — a housing stock where many roofs are at or past their service life. Local labor sets the rate roofers charge in Bellmore.

Field notes

Common Reasons Bellmore Homes Need Shingle Roof Replacement

  1. Wind Damage from Nor'easters

    Bellmore is prone to strong nor'easters that can lift and tear shingles, especially on older roofs. Repeated wind exposure weakens sealant strips, leading to leaks and the need for full replacement.

  2. Algae and Moss Growth

    The humid coastal air and shade from mature trees in neighborhoods like North Bellmore promote algae and moss growth. This traps moisture against shingles, accelerating granule loss and rot.

  3. UV Degradation

    Long Island's intense summer sun causes asphalt shingles to dry out and crack over time. South-facing roof slopes in Bellmore show this wear first, with brittle shingles that no longer seal properly.

  4. Ice Dams

    Snow on Bellmore roofs can melt and refreeze at the eaves, forming ice dams that force water under shingles. This repeated freeze-thaw cycle damages the roof deck and necessitates replacement.

  5. Hail Impact

    While not frequent, hailstorms do occur on Long Island and can bruise asphalt shingles, reducing their lifespan. Granule loss from hail exposure often leads to premature aging and replacement.

The process

What to Expect During a Shingle Roof Replacement in Bellmore

In Bellmore, roof replacements must comply with New York State contractor licensing requirements. Your contractor will pull a permit with the Town of Hempstead building department, which may require an inspection of the roof deck before new shingles go on. The typical process starts with an on-site measurement and material estimate, followed by a tear-off of the old shingles. The crew installs new underlayment, ice-and-water shield at eaves and valleys, and then the shingles. After installation, the town's building inspector will do a final sign-off. Expect the work to take two to four days, depending on roof size and complexity.

Nearby coverage

Shingle Roof pricing near Bellmore

Q&A

Shingle Roof cost questions — Bellmore

What factors affect shingle roof replacement cost in Bellmore?

Costs depend on roof size, pitch, and complexity; the type of shingles chosen (e.g., architectural vs. three-tab); the condition of the existing roof deck; local labor rates; and permit fees. New York's building code requirements for underlayment and ice-and-water shielding also add to material costs. Seasonal demand can influence pricing, with spring and fall being busier times.

How do I choose a roofing contractor in Bellmore?

Look for a contractor licensed in New York State and insured with general liability and workers' compensation. Ask for local references and check online reviews. Ensure they pull the required permits with the Town of Hempstead. Get multiple written estimates and compare the scope of work, not just the price. Avoid contractors who ask for full payment upfront.

What are New York's licensing requirements for roofers?

New York State requires home improvement contractors to register with the state's Department of State. Additionally, the Town of Hempstead may have its own licensing or registration requirements. Always verify that your contractor holds a valid New York State Home Improvement Contractor license and any local permits needed for your project.

When is the ideal time to replace a shingle roof in Bellmore?

The ideal time is late spring through early fall, when temperatures are moderate and rain is less frequent. This allows shingles to seal properly and reduces the risk of weather delays. However, experienced crews can work in cooler months as long as conditions are dry and above freezing. Plan ahead, as contractors often book up in peak season.

Do I need a permit for a roof replacement in Bellmore?

Yes, the Town of Hempstead requires a building permit for roof replacements. Your contractor should handle the permit application and schedule the required inspections. Permits ensure the work meets New York State building code and local safety standards. Skipping the permit can lead to fines and issues when selling your home.

Talk to a roofer

Get a shingle roofing quote.

3-tab or architectural — compare quotes from licensed local roofers.

(855) 000-0000

Lines: Mon–Fri 10am–7pm

Call (855) 000-0000